Chrysler Repair: 96 Cirrus 2.5L 6 CYL TCM removal, solenoid pack, center bolt

Question
I am trying to replace the input speed sensor. The only way I can get to it is to remove the TCM. The 3 screws are no problem,I am having problems removing the attached harness. The center bolt just spins. Just how does the electrical harness separate from the TCM? Also, any tips on getting to and replacing that input speed sensor would be greatly appreciated!

Answer
that what u are tying to remove is called a solenoid pack  not TCM the bolt does not come out all the way  just enough to come out of the connector then u pull up to take the connector off. And i hope u have a new gasket for the pack because it will leak now that U have taken it loose.
U should not have had to take off the pack in order to get to a speed sensor.