Chrysler Repair: Radio amplifier installation:1996 Concorde, amplifier installation, amp power

Question
I am trying to install an amp and i cant find the hold in the firewall for the power wire.

Answer
Hi Rob,
There are likely to be no pre-drilled holes as the wiring from the engine compartment to the cabin passes thru bulkheads with multi-pin pass thru plugs. So I would suggest that you get power for the amp at the box under the dash. If you can tell me the amp's current demands, and whether you want the amp to be connected to battery power all the time or to just get power in the accessory and run positions of the ignition key I can suggest to you which fuse to tie the amp power wire to in the junction block under the dash.
Roland