Dodge Repair: Blower Motor Resistor, blower motor resistor, 2006 dodge durango

Question
Where is it located on a 2006 Dodge Durango Limited HEMI?

Answer
If equipped with a trim cover (2) remove the two screws (1) that secure the trim cover over the blower motor resistor (3) located below the right side of the instrument panel and remove the cover.



 
3. Disconnect the wire harness connector (1) from the blower motor resistor (2).
4. Remove the two screws (3) that secure the blower motor resistor to the front HVAC housing.
5. Remove the blower motor resistor from the front HVAC housing