Dodge Repair: changing headlamps on my 1999 plymouth grand voyager se, plymouth grand voyager, hood latch

Question
Can i have step by step instructions on how to change my driver and passenger side headlamps on my 1999 plymouth grand voyager se, 3.3L engine, assembly date 12/98. Thank you

Answer
These are the procedures you will need. They are text only, no pictures.

HEADLAMP MODULE
Minor amounts of fogging may occur around the edges of the headlamp lens when exposed to humid conditions. This is considered normal. The fogging will dissipate with increased ambient temperature or headlamp usage.

REMOVAL
Release hood latch and open hood.
From inside engine compartment, remove nuts holding headlamp module to radiator closure panel.
Remove screw holding top of module to closure panel.
Remove headlamp module from radiator closure panel
Disconnect wire connectors from back of headlamp module.
Separate headlamp module from vehicle
INSTALLATION
Place headlamp module in position on vehicle.
Connect wire connectors into back of headlamp module.
Place headlamp module in position on radiator closure panel.
Install nuts to hold headlamp module to radiator closure panel.
Install screw to hold top of module to closure panel.
Verify headlamp operation and alignment.