Dodge Repair: 97 neon powersteering and altenator belts, power steering pump, belt tension

Question
i know youve probly answered  this before but im not exactly sure how to loosen the belt enough to get it off..please help

Answer
ACCESSORY DRIVE BELTS
AIR CONDITIONING COMPRESSOR AND POWER STEERING PUMP
1.Loosen the power steering pump locking bolts A and B and pivot bolt C Power Steering Pump Adjustment to remove and install belt and/or adjust belt tension.
2.Using a 1/2" breaker bar, adjust belt tension by applying torque to the square D hole on the power steering pivot bracket. Adjust tension to specification given in Belt Tension Chart.
3.Tighten in order, first tighten locking bolt A to 27 N·m (20 ft. lbs.) then, bolt B to 27 N·m (20 ft. lbs.) Then pivot bolt C to 54 N·m (40 ft. lbs.)
Accessory Drive Belt Gauge  Torque
Power Steering Pump and Air Conditioning Compressor  New 135 lb. 121 N·m (90 ft. lbs.)
Used 100 lb. 81 N·m (60 ft. lbs.)
Generator New 135 lb. 121 N·m (90 ft. lbs.)
Used 100 lb. 81 N·m (60 ft. lbs.)

GENERATOR BELT
1.Loosen pivot bolt E then locking nut F and adjusting bolt G Generator Adjustment to remove and install belt and/or adjust belt tension.
2.Tighten adjusting bolt G, adjust belt tension to specification shown in Belt Tension Chart.
3.Tighten pivot bolt E to 54 N·m (40 ft. lbs.) Locking nut F to 54 N·m (40 ft. lbs.)