Dodge Repair: Change Starter 1997 Intrepid, starter solenoid, cable nut

Question
I have to change the starter on my 1997 Intrepid 3.5L.  I did not get a diagram as to how you replace it.  Can you give me instructions?

Answer
STARTER
3.3L ENGINE
REMOVAL
Disconnect battery negative cable Remove and Install Battery Cable
Raise vehicle.
For easier servicing, do not remove the wiring from starter at this time.
Remove three starter attaching bolts from engine/transaxle Starter - 3.3L Engine
Remove starter assembly from transmission housing. Position the starter to gain access to the wiring connectors.
Remove the battery positive cable nut from starter and remove the cable Wire Terminal Connections
Disconnect push on solenoid connector.
Remove the starter from vehicle.
INSTALLATION
For installation, reverse the above procedures. Clean corrosion/dirt from the cable and wire terminals before installing wiring to the solenoid.

3.5L ENGINE
REMOVAL
Disconnect battery negative cable Remove and Install Battery Cable
Raise vehicle.
For easier servicing, do not remove the wiring from starter at this time.
Remove three bolts attaching starter to engine Starter - 3.5 L Engine
Remove starter solenoid assembly from transmission housing. Position the starter to gain access to the wiring connectors.
Remove the battery positive cable nut from starter and remove cable Wire Terminal Connection
Disconnect push on solenoid connector.
Remove the starter from vehicle.
INSTALLATION
For installation, reverse the above procedures. Clean corrosion/dirt from the cable and wire terminals before installing wiring to the solenoid.