Dodge Repair: 1999 Dodge Durango Power Door Lock Actuator Replacement, dodge durango, door latch

Question
How do I remove and replace a power door lock actuator on a 1999 Dodge Durango left rear door?

Answer
REAR DOOR TRIM PANEL
REMOVAL
Release door latch and open door.
Roll window down.
Remove window crank Window Crank - Typical , if equipped.
Remove screws attaching trim panel to door Rear Door Trim Panel
CAUTION: Do not forcibly pull trim panel from door, damage to trim panel may occur.

Simultaneously lift upward and outward to release retainer steps from inner door panel Trim Panel Retainer
Disengage inside handle linkage rod from inside handle.
Disconnect power widow/lock harness connector, if equipped Power Window/Lock Connector
Separate door trim panel from vehicle.
If necessary, pull upper trim extension outward to disengage from rear door
INSTALLATION
If removed, install upper trim extension on rear door.
Position trim panel at door.
Engage harness connector for power window/lock, if equipped.
Engage inside handle linkage rod to inside handle.
Align trim panel retainer steps with inner door panel and slide trim panel into place.
Install screws attaching trim panel to door.
Install window crank, if equipped.