Dodge Repair: wiper arm removal, pivot shaft, park position

Question
How can I remove the wiper arm on my 1998 Stratus?
The spring broke and I need to put a new arm on.

Answer
WIPER ARM AND BLADE
REMOVAL
Place the wiper arm/blades in the PARK position and turn ignition OFF.
Unsnap arm cover. By hand rock gently side to side and slide away from arm pivot. To remove the left side raise hood for clearance
Loosen retention nut.
Remove the arm from the pivot by using a universal claw puller or by hand rock gently side to side and slide. Raise blade and arm off glass and rock side to side while applying pressure with the puller till loose. Ensure that the puller is not on the collar below the arm.
Remove arm retention nut and arm.
INSTALLATION
Place arm on pivot shaft, align blade with wiper location made on windshield
Start retention nut.
Raise arm and blade off windshield while tightening retention nut. Tighten nut to 33 to 40 N· mm (23 to 29 ft. lbs.)
Install arm head cover.