QuestionQUESTION: I own a 2001 Grand Cherokee Ltd 4.7,and need to replace the starter motor? Any really good manuals or step by step instructions you can recommend?
Thanks
CJ
ANSWER: undo battery and the rest is 2 13 or 15mm bolts and wire connectors pass side.
---------- FOLLOW-UP ----------
QUESTION: Any good manuals?
I live in CT
AnswerI just told U what to do u dont need a manual I did one in under 10 min on my back.
REMOVAL
Disconnect and isolate the battery negative cable.
Raise and support the vehicle.
Remove the lower (forward facing) mounting screw securing the starter motor to the automatic transmission torque converter housing (Starter Motor Remove/Install - 4.0L Engine) or (Starter Motor Remove/Install - 4.7L Engine).
While supporting the starter motor with one hand, use the other hand to remove the upper (rear facing) mounting screw securing the starter motor to the automatic transmission torque converter housing.
Lower the starter motor from the front of the automatic transmission torque converter housing far enough to access and remove the nut that secures the battery cable eyelet to the solenoid battery terminal (Starter Wire Harness Remove/Install - 4.0L Engine) or (Starter Wire Harness Remove/Install - 4.7L Engine). Always support the starter motor during this process, do not let the starter motor hang from the wire harness.
Remove the battery cable eyelet from the solenoid battery terminal. Always support the starter motor during this process, do not let the starter motor hang from the wire harness.
Disconnect the solenoid terminal wire harness connector from the connector receptacle on the starter solenoid. Always support the starter motor during this process, do not let the starter motor hang from the wire harness.
Remove the starter motor from the engine compartment.
