Land Rover Repair: ecu, discoweb org, wiring loom

Question
is there any way to fit a direct wire to a ecu  ive just put a 3.9 in a rangerover and it wont start i have spark but no fuel   i dont have all the wiring loom  for the 3.9 just bits

Answer
Hi Eddie,

I'm not sure you can do that, however, someone with more experience with the ECU connections could help you.  Post this question on www.discoweb.org and I'm sure you'll get a more complete answer.

There are quite a few owners on Discoweb who've done wonders with the 3.9 engine.  I'm curious to know if this is possible myself!

Best of luck,

JohnMc