Motorcycle Repair: replacing clutch hub, replacing clutch, clutch lever

Question
how do i get the clutch assembly out of the old clutch hub on a 1998 fatboy?

Answer
Drain the primary fluid and remove the primary cover. Behind it you will see the clutch. Loosen the cable for the clutch so it is shorter. Remove the 6 bolts holding the pressure plate on and you will see the clutches behind the pressure plate. Put it back together in reverse. After together, loosen the clutch adjuster in the center and turn it out a few turns and then back in just until it bottoms out and then back out about 1/8 of a turn. Now adjust the clutch cable so you have about 1/8 inch play in the clutch lever
Good luck and happy riding
Mike