Nissan Repair: Washer Fluid Nozzles, fluid nozzles, washer nozzles

Question
I recently asked about getting my washer nozzles to work again and I took your advice and used compressed air to blow them out. The passenger side started working great again and the driver's side has water sort of spraying out now, but it's not to the capacity that it should be. So my question is how do I remove that part? Its virtually impossible to clean it anymore without removing it.

Answer
Hi Maria -

I am glad you got it to work (semi).

The metal tube portion of the washer nozzle is supposed to be held down with a small screw or bolt. Open the hood and look under where it protrudes through the cowl, and you should be able to locate it.

Another option is to take long, but string wire and run it through several times. That usually does the trick.

Hope this helps -
aloha
calvin