Nissan Repair: blower motor, nissan pulsar nx, squirrel cage

Question
I  have to replace the  blower motor  on my Nissan Pulsar NX 1989.  I found the motor locally for about $170 but can't find any info on how to replace it.  I believe it's under the glovebox - help!?

Answer
Jay,

I do not have a picture for you but the process is easy.  There are screws that hold the glovebox on.  These are at the pivot point.  Once the glovebox is removed you can see the bottom of the blower motor.  There are three screws that hold it on and there is a connector that plugs into it.  The blower motor has a squirrel cage that blows the air and this has to be pulled off the old motor and put on the new motor.  Then, you install it and screw it in and connect the wires.  Now, the glovebox goes back on.