Nissan Repair: 90 nissan pickup, nissan pickup, squirt

Question
My pickup quit at a light, I assumed it was out of gas, but after adding gas to the tank it would not start.  Do I need to bleed the system and if so where is it located.

Answer
John,

You could prime the engine with carburetor cleaner and that would get the engine to fire up and possible get the fuel flowing to the engine.  It might take a few times and it only takes a squirt at the throttle.  Then put the filter back and turn it over.  Repeat until it keeps running.  Make sure you have put several gallons of gas in the tank as a couple usually does not work.