Nissan Repair: Idler pulley replacement 1984 nissan 300 zx, tension bolt, center bolt

Question
I loosed the belt tension and remove the short bolt on the right of the assembly and the long bolt on the left.  I still cannot remove the assembly.  Is there another bolt or something holding it to the engine, or is it just "stuck" after 21 years and needs to be pried off.
thank you.

Answer
David,

The tension bolt holds the bracket and the center bolt holds the pulley.  If you took the center, short bolt out and it will not come loose then it is stuck.  So, a little WD 40 or the like and a little work with a common screwdriver on each side should get it to come off.