Pontiac Repair: push rods, push rods, exhaust valves

Question
ok i got which rods were which but i have no idea which ones go where as far as the intake and the exhaust can u help me?

Answer
Hi James:

what engine is this for? If it's a 3.1 or 3.4 engine the longer push rods are for the exhaust valves. shorter ones go on the intake. Most of the other engeins the push rods are the same inatke and exhaust in terms of length. Try not to mix them up they have wear patterns on them that match the lifer on rockers arm they came off of. Good luck :)