Pontiac Repair: 2006 GM 3.8 SFI fuel injector wire connector, lt blue, connecto

Question
How do you remove the multi-piece weatherpack connector from the injector to check impedance?  This connector has a gray housing, a green "lift latch," and a lt. blue wire plug with 2 side latches...

Answer
Hi Sean:To remove the connecto you need to lift the grey piece up just a haid then depress the tab to remove the connetor from the injector. I can never do it the right way so I use a pick and just pull the grey plactic piece right out of the connector and then depress the tab and pull the connector off the injector. That grey piece is a connector position assurance clip basically it makes it so the vibartion of the engine can't allow the connector to come off by it's self. Good luck :)