Pontiac Repair: 2000 pontiac sunfire, pontiac sunfire, 2000 pontiac sunfire

Question
todd I just changed the multifunction turn signal for my sunfire and now the orn wont work.  I can activate the horn by pushing the metal lever on the multifuction swith but not by pressing the horn.  Is something not lined up correctly?

Answer
Hi chris:

yes the multi function switch has a contact on it for the horn. If the switch was installed and the contact on the switch was not on the back side of the cancel cam the horn will not work. when you install the swicth it have to slide it in on an angle to make sure it goes in behind the cancel cam. The cansel cam is the plastic piece with a copper backing on it. It cancles the t urn siganls and is the ling between the horn switch and the multi function switch. good luck. Hopefully when you intstalled the swict hyou didn's damage the contact on it.