Small Engines (Lawn Mowers, etc.): need a pulley, side menu bar, double pulley

Question
I have a jacobsen Imperial 626 snow blower and I needthe drive pulley. It is a double pulley which fits a 1 inch shaft and has a 3.25 od

Answer
Hello Bob:

>>You can Visit the Jacobsen Site at http://www.jacobsen.com/americas?country=146 . Click on Genuine Parts (Top menu bar).Then Click on Online Parts Look up (Side menu bar). Then Select your language. Now Select the Model Tab. Now Enter your Model Number and Select Search.
>>Your Model Number should Contain 5 or 6 Digits and Some Contain 2 Letters also.
>>You can View Online Manuals at; http://www.jacobsenmanuals.com/ .
>>The 626 is the Series Model Number and Not the Unit Model Number.
>>You can Also Purchase this Pulley at Any Small Engine Service Center or your Local Machine Shop usually Carries a Selection of Pulleys that will Replace this Pulley.
>>I use www.wilsonironworks.com/ for most of my Pulley Purchases. The Pulleys may Cost a Little More, but they Tend to be Made Heavier than the OEM's and they can Usually be Removed without Damage whenever a Puller is Required to Remove the Pulley from the Engine.
>>http://www.outdoordistributors.com/ is also a Good Place to Purchase these Pulleys.
>>If you Hit a Snag, have More Questions or this Does Not Correct the Problem,  I Hope to be Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Follow Up Questions are Received Anytime. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John