Small Engines (Lawn Mowers, etc.): reverse safety switch (lawn mower), switch jumper, jumper wire

Question
I recently bought an older Cub Cadet 1620 Hydro that is in nearly new condition.  Can you tell me how to bypass the "reverse safety switch" which shuts the mowing deck off when the transmission is placed in reverse??

Answer
Hello Bruce:

The Following is the Instruction File for Checking the Seat Safety Switch. **Check the Seat Safety Switch. PLEASE REMEMBER THAT THE INSTRUCTIONS FOR CHECKING THE SAFETY SWITCHES IS JUST THAT!!! FOR CHECKING ONLY. I NEVER Suggest a Mower be Operated with a Safety Device or Switch Disconnected or Bypassed. Now. On Some Model Mowers you can Simply Unplug the Safety Switch from the Harness. On Other Models you have to Place a Jumper Wire Between the Harness Terminals (on the 4 Post Switch Jumper from Same Color Wire to Same Color Wire). The Seat Safety is Showing No One is Seating in the Seat when the Clutch or Blades are Engaged.**  The Same goes for Checking the Reverse Safety Switch. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John