Small Engines (Lawn Mowers, etc.): older 5hp flat head 1 cylinder briggs + strattion motog, point gap, spec numbers

Question
I can find no make model numbers or id codes on this motor. It has the 3 leg magneto pick-up for ignition and points under the flywheel. I need the gap spec for the magneto to the flywheel, and the point gap also.It would help to have the flywheel rotation info also.             thank you.

Answer
Hello Steve:

Send me the Model and Type or Spec Numbers Off the Engine, Please. With these I can Locate the Proper Manual and Better Assist you. The Model Numbers Are Stamped Into the Blower Housing (metal engine cover) Across from the Spark Plug. The Point Set Gap and Magneto/Coil Gap is Set to .020in. Usually the Engine Rotation is Clockwise. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John