QuestionQUESTION: I have the above mentioned tractor that the deck was off and there was no v-belt. I purchased a v-belt(M123281) very expensive :) from John Deere & I cannot locate a belt diagram anywhere on the tractor or the deck. This deck is 46" cut with 3-blades & has 6-pullies (not counting the pulley on bottom of engine). I have been to JD parts site & found the belt diagram for the power train, but nothing for the deck itself. Can you help me locate. Tractor is ready to run as soon as I can get the belt on the deck. Thanks in advance, Little John :)
ANSWER: Hello Little John:
I am Going to Refer you to Our JD Expert; Paul the Truth Meister. Please Resubmitt this Question to Him. Thank you. He is a JD Service Supervisor and can Assist you Better than I. If it Were An Engine or Transaxle Question, I May have Been of Assistance. Thanks for Asking me The Question. Till Next Time. May All Your Mechanical Problems be SMALL ONES and May the All Mighty Bless You and Yours. Thanks Again.
Best Wishes and Good Luck
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: Thanks for trying to help me on this issue, but i found the solution today. MY local JD dealer did not give it up easily, but I was persistent on the issue & they let me look at one of their manuals. I wanted to buy one, but will order it online, since they were not too anxious to help me out, even though, I bought all my parts from them. I had it so close to what i needed, it wasn't even funny. One pully off :)
AnswerHi Little John:
Great!! I am Glad you Got the Belt Routed Properly. Thank you for the Kind Words. Till Next Time. May All Your Mechanical Problems be SMALL ONES and May the All Mighty Bless You and Yours. Thanks Again.
Best Wishes and Good Luck
Respectfully
John
