Small Engines (Lawn Mowers, etc.): Homelite Chainsaw XL UT-104444, homelite chainsaw, bad hope

Question
I can not get this Chainsaw to run. It has no spark. I suspect that the problem is the ignition module but I don't know for sure. Is there any way to test it?

Answer
Hello Bill:

Remove the Spark Plug and Wrap the Threaded Section of the Plug with Wire, then Attach the Other End of the Wire to the Engine Block. Now, Remove the Coil Shut Off Wire at the Shut Off Switch. Check for Fire. If No Fire, then Remove the Cut Off Wire from the Coil (removal of the blower housing required) and Check for Fire.  Turning the Engine By Hand (giving a Quick Twist with the Wrist) is Enough to Make the Coil Fire the Plug. If Still No Fire, then the Coil/Ign Module is Bad. Hope this Helps. I am Here if You Require More Assistance. Let me Know What Happens, Please. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 9pm EST (US). My New Day Starts then. Thanks.

Respectfully

John