Toyota Repair: Hoses hoses hoses, vacuum pipes, toyota 4wd

Question
Ted, I think I got my vacumn hoses on correctly now, but there are 4 hoses that are not shown in the vacumn hose diagrams for my 1992 Toyota 4WD Pickup, V6, EFI system.  These four hoses are larger than the vacumn hoses.  Two I think are related to the four wheel drive and are suppose to go to the power steering pump.  The other two I believe go to the fourth of four, the one closest to the front of the vehicle, vacumn switches, and this switch is not shown as part of any vacumn hose diagrams.  They four hoses originate from the passenger side of the engine, above the spark plugs, in line with the PCV valve line, and are larger than the vacumn hose lines.  ALso, the hose at the bottom of the charcoal canister goes where?  It is hanging loose and not connected to anything.

Answer
The two hoses from the bottom of the power steering pump go to two larger vacuum pipes on the intake chamber. No large hoses are connected to the 4x4 system, these must bo somewhere else. The hose at the canister bottom is just a vent, not connected to anything. If you can, email a picture of the hoses in question directly to me<tedrttr@yahoo.com>