Toyota Repair: drive axle, axle shaft, drive axle

Question
what steps do i have to take too replace the axle  on my 1994 toyota pick up/?front right axle only.

Answer
Remove the four wheel drive hub(10mm bolts) pull the hub off, there will be either a snap ring or a 12mm bolt on the end of the axle, remove it, remove the four 14mm bolts on the bottom of the lower ball joint, pull the disk and caliper away from the axle until it clears the axle shaft, tie it out of the way, remove the allen bolts from the inner CV joint flange, remove the lower shock bolt so the lower control arm can drop down this will give you enough room to pull the axle out.