How to Remove Blue Tape From a Windshield

When the windshield of an automobile is completely replaced, it is glued in place using a special adhesive. Although the adhesive sets quickly, it takes approximately 24 hours to fully cure. To provide additional support to the glass during this time, most glass repair professionals stretch a low-tack, blue tape from the windshield back onto the body of the car. After the appropriate time period has elapsed, the vehicle owner can remove the tape from the car.

Things You'll Need

  • Razor blade
  • Non-abrasive cloth
  • Denatured alcohol
  • From the front of the windshield try to peel up a section of the blue tape with your fingernail. If needed, use a razor blade to scrape along the edge of the tape until the tape is raised enough for you to grasp it between your fingers.

  • Pull the tape off of the windshield in a slow motion continuing over the top painted part of the car. When the tape comes off, discard it in the trash.

  • Repeat the peeling process of slowly removing the remaining blue tape from the windshield. There is always at least two pieces but sometimes there are more.

  • Once all the blue tape is removed apply 1 tsp. of denatured alcohol onto a non-abrasive cloth.

  • Wipe the windshield where the tape was located to remove any minor traces of residual glue left from the tape.

  • Run your hand over the top painted section of the car to see if you feel any residue. If residue is present, apply another 1 tsp. of denatured alcohol to a clean section of the cloth and wipe, gently removing the adhesive.