Metalflake That Sprays On Dry - Rod And Custom Magazine

Metal Flake Paint - Tasty Flakes

Thanks to the resurgence in popularity of traditional '50s- and '60s-style customs, wild paint jobs and specialty paints, such as metalflake, are showing up again. That's good news for fans of this style, but it might be bad news for amateur painters who might be afraid to shoot something more difficult than ordinary primer, base colors, and clear.

"A few years ago, only the best of the best were out there shooting metalflake," says custom painter Rikk Clark. "I wanted to learn how to spray 'flake, but I live in a really small town where there was nobody to help me learn, so I had to figure it all out on my own."

Rikk's experience led him to develop a completely different way of painting with metalflake. Ordinary metalflake paint consists of basecoat or clear with metallic reflective flakes added to the liquid. Rikk's method involves spraying dry 'flake onto a wet clearcoat using a special gun, called the Flake Buster, which he developed just for this process.

Rikk started his own business, Old School Flake, in order to sell the Flake Buster and several lines of his dry 'flake. We talked to him about the advantages of his system over traditional systems. Then, to get a completely objective opinion about this stuff, we went over to an independent body and paint shop, Hop Up Shop in South Gate, California, where shop owner Ken Abreu and his crew were adding some Butch Lynch-designed scallops to Lisa and Jeff Holt's '59 Thunderbird. We jumped into the spray booth just as the 'Bird's side spears were getting sprayed with Shifty metalflake from Old School Flake.The procedure was simple and quick. The basecoat was prepped the same way you would do before shooting any paint. A single coat of clear was applied with an ordinary gun and immediately, while the clear was still wet, the Old School Flake was applied using the Flake Buster. After adequate drying time (15 or 20 minutes in our case), additional coats of clear were applied to cover the 'flake material. That's all there was to it.

As promised, the 'flake was sprayed very quickly and very cleanly. Where there were mistakes, it was a simple fix. If you've been afraid to try painting 'flake, Old School Flake makes the job about as easy as it gets.

Old School Flake does not sell directly to consumers, but if you contact Rikk Clark, he'll put you in touch with a distributor in your area.

The 'Flake
In the past, the metalflakes used in paint were thicker (half a mil was typical) and were cut square. Old School Flakes has changed the shape of their 'flakes from square to hexagonal. Trimming off a few more corners makes it easier for the 'flake to travel through the gun nozzle. Many varieties of different types and colors of 'flakes and pearls are available in 2oz, 4oz, and 6oz packages. The Regular 'flake line is available in 19 different colors, all 0.015 size. A 2oz jar sells for less than $10. The Shifty 'flake (used on the Thunderbird shown on these pages) is created for a greater iridescent and "holographic" appearance. It is available in eight colors, and five sizes from 0.008 to 0.064. A 2oz jar sells for less than $15. The color-shifting Psycho 'flake is ideal for use over a dark basecoat, and is available in four different color combinations.

The Gun
The Flake Buster spray gun weighs a fraction of what a standard paint gun does, due to its small size and the fact that it's not weighed down with a can of liquid paint or clear. The plastic jar of 'flake attaches right to the Flake Buster. Hook up the air, and you're ready to shoot 'flake. The gun, which sells for just under $250, is adjustable for air pressure and shooting distance, and can handle any size of 'flake all the way up to chunky 1/8-inch hexagons.Unlike traditional metalflake painting, which can require close-up shooting to make sure the paint is loading thoroughly and evenly, the Flake Buster lets you stand further back, which reduces the chance of spraying light and heavy spots. And since the lid swivels 360 degrees, the gun can be held at any angle, even upside down, when spraying hard-to-reach spots. Cleaning the Flake Buster is a lot easier than cleaning a standard paint gun. Since the material is dry, all it takes is a few shots of air to clean it out. Any unused 'flake is saved for the next job. A dab of aluminum polish in a shop rag, and buffing with a soft cloth keeps the gun looking like new.

The DVD
Old School Flake has created a helpful how-to DVD for beginners or anybody who wants to improve their skill painting in this new way. The "Bustin Flake" DVD is available individually or as part of a package when you order the Flake Buster gun and 'flake. We recommend spending the extra 30 bucks, since the DVD covers everything from the basics of adjusting and using the equipment and 'flake material properly, as well as tips on prepping, shooting flames, mixing custom tints, and other useful info. The program demonstrates a variety of projects being painted with Old School Flake in various ways.