Ultimate Diesel Data Logger
Corsa data acquisition systems are synonymous with the sled pull and drag racing world for their unmatched diesel data logger capabilities. Exclusively distributed by Scheid Diesel, the EZ II Logger allows diesel motorsports teams to thoroughly analyze how an engine and vehicle performed after each pass made at the track. Some parameters recorded include: engine speed vs. wheel speed (to monitor clutch or tire slippage); turbo boost and backpressure; individual cylinder EGT; air intake temperature; oil, fuel, and water injection pressure; crankcase pressure; and even suspension travel.
Scheid Diesel
(800) 669-1593
www.scheiddiesel.com
| 1011dp November 2010 Power Products scheid Diesel Corsa Data Logger
Duramax Flexplates
If you've transformed your Duramax into a bulletproof performer, the factory Allison transmission flexplate may be your next weak link. SoCal Diesel's aftermarket units are lighter than stock for increased throttle response but are also much stronger. All flexplates are properly counterweighted so you can install them on an already-assembled engine without the need for a rebalance. Three units are available, including one for '01 to '05 models years, '06 to '10, and one for 7.1L stroker engines.
SoCal Diesel
(661) 775-5620
www.socaldiesel.com
| 1011dp November 2010 Power Products socal Diesel Duramax Flexplate
Intake Horn For 6.7l Cummins
Shibby Engineering is helping to kick the 6.7L Cummins aftermarket into high gear with its latest product. Its Stage 2 intake elbow for '071/2 to '10 engines is made from cast aluminum, is a direct bolt-on, and is said to lower EGT and increase fuel economy. Its intake elbows also come with five pre-tapped ports for monitoring boost or adding injectables, and five port plugs. Units are available in several powdercoated colors (shown here with its dipstick tube bracket).
Shibby Engineering
(419) 350-1713
http://shibbyengineering.com/store/
| 1011dp November 2010 Power Products shibby Intake Horn Cummins 6 7l
Engineered Cummins Conversions
Repowering your Ford with Cummins power has never been easier. FordCummins.com now offers engineered, pre-assembled kits for swapping a 12-valve, 24-valve, or common-rail 5.9L into your Super Duty. Key conversion components include: transmission adapters and controllers, bolt-in motor mount sets, gauge cluster adapters, and even wiring harness modifications. Cummins swap parts are also available for Ford Excursions, Broncos, E-series vans, and virtually any F-series truck dating as far back as '67.
FordCummins.com
(406) 755-8878
www.fordcummins.com
| 1011dp November 2010 Power Products fordcummins Conversion Kit
Universal Stacks
Diamond Eye Performance now offers universal dual exhaust stacks for any Cummins, Duramax, or Power Stroke application. Its kits can be had in 5-inch aluminized or 5-inch stainless steel piping. Adapters and flex tubing allow this dual stack kit to easily be customized to fit your truck's factory exhaust system or current performance exhaust setup. According to Diamond Eye, turbo-back stack kits are coming soon as well.
Diamond Eye Performance
(800) 635-9950
www.diamondeyeperformance.com
| 1011dp November 2010 Power Products diamond Eye Performance Universal Dual Exhaust
Injector Tool Set
If you remove or install 7.3L Power Stroke injectors often, Rosewood Diesel's injector-pulling tool set will speed up the process. It also simplifies the process of replacing cracked injector sleeves-with the cylinder heads and the engine still sitting in the truck. According to Rosewood Diesel, its injector-pulling tools are black oxide and hard-anodized for long life and sell for $235. In addition, a new set of brass injector sleeves (8) can be had for just $100 more.
Rosewood Diesel
(440) 286-1990
www.rosewooddieselshop.com
| 1011dp November 2010 Power Products rosewood Diesel Injector Tool Set
