Diesel Engine Radiant Guard: Heat3 Turbo Shield
With the tremendous amount of radiant heat your turbocharger
experiences, Design Engineering has introduced its T3 turbo shield to protect your investment. Constructed of pulverized lava rock extruded into fibers and woven into a tight fabric, its turbo shield is said to have unmatched strength and durability. In fact, Design Engineering claims its product can handle direct, continuous heat up to 1,800 degrees and up to 2,500 degrees of radiant heat. This keeps more heat inside the turbo, resulting in quicker spool up, while reducing radiant heat for a cooler intake temperature at the same time.
| power Products design Engineering
Design Engineering
(800) 264-9472
www.designengineering.com
High-Pressure Oil Pump For 7.3L Power Stroke
The high-volume Adrenaline high-pressure oil pump from DieselSite is one of its hottest selling items for the 7.3L Power Stroke. Available for all 7.3L Power Strokes ('94 1/2 to '03), its pump is ideal for both modified and stock engines. According to DieselSite, its units increase the oil volume output, which allows higher injection pressures in the HEUI fuel system. In addition, DieselSite claims power gains can be had across the entire rpm range, whether your truck has stock, Stage I, Stage II, Stage III, or hybrid fuel injectors.
| power Products dieselSite
DieselSite
(888) 414-3457
www.dieselsite.com
Performance Plunger & Barrels
Rocken Tech Products has released its latest high-performance 16mm plunger and barrel kit for P7100 injection pumps. The kit includes 16mm plungers and barrels, control sleeves, barrel rings and covers, springs, spring covers and spring seats, clamp rings, and a control rack. Rocken Tech stated that modifying the Bosch pump housing is required, and that 1,500 cc of fuel delivery is possible. This P-pump modification should support power levels in the 1,200 to 1,300hp range.
| power Products rocken Tech Products
Rocken Tech Products
(707) 658-1915
www.rocken-tech.com
Twin Turbos For Towing
Trusted Performance released its compound turbo kits designed for 6.0L Power Stroke trucks that tow. Its system works with the factory Y-pipe, downpipe, intake, and EGR system in place and is completely bolt-on. Several compressor wheel sizes can be had with its non-wastegated BorgWarner turbochargers. All turbos can be matched with one common A/R housing size. An optional wastegate can be added to any of its turbo configurations for drive pressure relief. Don't forget about the radiant heat either when towing! The Turbo Guard would be a great application here too.
| power Products trusted Performance
Trusted Performance
(817) 736-8058
www.trustedperformance.com
First-Gen Overdrive Shift Fix
Does your first-gen Dodge's automatic transmission jump in and out of Overdrive? Do you ever have to take your foot off the pedal to let it shift into Overdrive? If so, the new potentiometer from DNR Customs may offer a solution. It replaces an inferior factory throttle-positioning sensor and allows you to dial in your Overdrive shift point. The kit includes a 5k linear taper-potentiometer, adjustable knob, 6 feet of three-strand wire, and costs $30.
| power Products DNR Customs
DNR Customs
(989) 280-9384
www.dnrcustoms.com
Heavy-Duty Lift
Looking to clear 35-inch tires with your Chevy or GMC 2500 HD? Zone Offroad may have what you're looking for. Its Zone HD system is built for everyday driving but was designed to withstand serious off-road abuse. The two-piece lower crossmembers, in combination with CNCmachined ductile-iron steering knuckles, are reported to match the OE geometry. Plus, the Zone Offroad kit adds a front differential skidplate to provide plenty of protection. The kit comes complete with torsion bar brackets, differential drop brackets, sway bar links, CV-shaft spacers, U-bolts, rear blocks, and four twin-tube hydraulic shocks.
| power Products zone Offroad Products
Zone Offroad Products
(888) 998-9663
www.zoneoffroad.com
