Hi-Flow Discharge
This brand-new bolt-on Hi-Flow exhaust discharge from Turbonetics for ’99-’03 Ford 7.3L Power Stroke diesels delivers lower EGTs and increased turbo performance for both stock and Turbonetics’ ceramic ball-bearing upgrade turbos. The new Turbonetics Hi-Flow discharge eliminates the factory EBV, increasing airflow and reducing EGTs by up to 100 degrees. Turbo spoolup is also improved.
Contact: Turbonetics
805/581-0333
www.turboneticsinc.com
| diesel Truck Parts April 2009 exhaust Discharge
Stage 2 Sealed Intake
The Stage 2 sealed intake system for the ’01-’04 GM Duramax LB7 6.6L from Advanced Flow Engineering (aFe) uses specially designed intake tubes to maximize air velocity and improve horsepower, torque, mpg, and throttle response. The rotomolded plastic box keeps engine heat out and installs with the factory mounts. The Pro-Guard 7 filter uses five layers of progressive cotton media plus two layers of synthetic media for maximum filtration.
Contact: aFe
951/493-7100
www.afepower.com
| diesel Truck Parts April 2009 sealed Intake System
On The Level
Leveling kits are all the rage with truck owners today, and ReadyLift’s version for ’09 Dodges will allow you to run a taller tire. Installs quickly and safely using the provided heavy-duty hardware. Quality step-by-step instructions are provided with the kit.
Contact: ReadyLift
877/759-9991
www.readylift.com
| diesel Truck Parts April 2009 leveling Kits
100 Extra Horsepower, 2-MPG Increase
The new MVP performance module from TS Performance can up your mpg by as much as 2 and pump up the horsepower by 100. Plugs into any ’98-’02 Dodge Cummins 24-valve diesel engine and intercepts the engine’s signals instead of copying and downloading a new program. This gives you the freedom to adjust horsepower levels from inside the cab, plus it won’t leave a trace on your factory computer.
Contact: TS Performance
270/746-9999
www.tsperformance.com
| diesel Truck Parts April 2009 mvp Performance Module
Ramm Cam
New from SuspensionMaxx, the Ramm Cam adjustable torsion-bar lever is designed for ’02-’05 Dodge Ram trucks. The Ramm Cam is made out of ultra-rigid 4140 heat-treated alloy steel and uses a patent-pending cam-locking design. There are six selectable front ride height positions ranging from 1.2 inches lower than stock to 2.0 inches above stock, with no loss of ride quality.
Contact: SuspensionMaxx
888/MAXX-CAM
www.suspensionmaxx.com
| diesel Truck Parts April 2009 torsion Bar Lever
Stop Bed Bounce
Tired of carrying along cement or sandbags to get your truck bed to stop hopping? The Willybar is designed to reduce your truck’s bed bounce and stabilize your ride. This ballast adds traction, yet the low profile allows you to freely load and haul equipment into and out of your truck bed. Attached with heavy-duty shackles and bolts, the Willybar just might save your teeth.
Contact: Willybar
877/338-3222
www.willybar.com
| diesel Truck Parts April 2009 willybar
Be Nice To Your Arm
The Arm-Restler by Easy Life Products provides a softer, wider place to rest your elbow while driving. Long commutes will be easier with the Arm-Restler’s gel padding. The Arm-Restler can be adjusted to any position desired and works with the window up or down.
Contact: Easy Life Products
435/640-0793
www.ezlifeproducts.com
| diesel Truck Parts April 2009 arm Restler
Level With Me
AccuAir has introduced the new line of e-Level electronic leveling systems and air-management packages for improved handling and reliable air suspension. You can program three ride heights, adjust it while driving, use a key remote, and more. TruPosition height sensors provide accurate leveling regardless of load, and anti-cross-loading technology gives balanced spring weights.
Contact: AccuAir
877/247-3696
www.accuairsuspension.com
| diesel Truck Parts April 2009 electronic Leveling Systems
See The Light
The new Sleekster lightbar from Randy Ellis Design for the ’07-’09 Chevy/GMC 2500-3500HD trucks is frame-mounted and extra durable. You can mount four lights up to 9 inches in diameter on the Sleekster. No drilling, cutting, or welding to install. The bar is made from 1¾-inch 0.120-wall-thickness steel tube and has CNC laser-cut brackets and light tabs.
Contact: Randy Ellis Design
602/803-1122
www.randyellisdesign.com
| diesel Truck Parts April 2009 sleekster Lightbar
Universal Hose
Unicoil is a universal alternative to pre-molded or custom hoses and allows any truck enthusiast to bend straight hose into any shape for a custom fit. The stainless steel Unicoil product, manufactured by Australia-based Unicoil International, is simply slid over the length of hose to wherever a bend is needed. Using nothing more than hand pressure, the hose can be shaped exactly as required, up to 90 degrees without kinking.
Contact: Unicoil
+61 8 9433 3718
www.unicoil.biz
| diesel Truck Parts April 2009 universal Hose
