Auto body repair & detailing: frount bumper plymouth prowler, plymouth prowler, needle type

Question
how do you separate the plastic to replace the wires to the directional

Answer
Hi Rick!....I am hoping you mean how separate the plastic electrical connector for the turn signal as to replace the wires within....If I didn't totally understand your question, please drop me another line....As far as the connector goes, they are not usually made to be taken apart....To remove the wires, this will be done from the back side of the connector where the wires go in, as there is a tiny " Barb " on each of them individually....You will need to use a tiny needle type pick to depress this barb, then immediatly pull out the wire....When replacing the wires, simply push them back in, as they will click into place....Thanks....Dave