Auto body repair & detailing: seat replacement, bolt holes, old bench

Question
I have a 1998 Chevrolet standard cab s-10 with a broken down bench seat. On E-bay a seller is advertising a pair of bucket seats for an S-10. Will these seat likely fit in the holes through which the bolts are holding in place the existing bench seat? How difficult a job is it to swap out my old bench seat for these two buckets?

Answer
Just un-bolt the seats and seat belts and bolt in the new seats and seat belts. The bolt holes should be the same they just are under the carpet for the center holes. This is a easy job if the holes are there.
         Thank you for the question!
         Ken