Auto Parts: SIGNAL SWITCH 1999 HYUNDAI SONATA, turn signal switch, steering wheel puller

Question
HOW DO I REPLACE SIGNAL SWITCH ON 99 SONATA 2.5. ANY SPECIAL TOOLS NEEDED.

Answer
Hi Tommy,

If you are talking about the column-electrical switch (Turn-signal switch) then yes, special tools are required. You'll need a steering wheel puller and a set of torx bits. ALWAYS disconnect the positive terminal on the battery before disconnecting/reconnecting the air bag if so equipped.

Looking for a reputable service technician? My advice on finding a good technician is: Steer clear of the dealership and 'chain' stores like Firestone, Sears, Pep Boys, Monro Muffler/Brake, Midas, etc. as they usually only employ ONE ASE Certified Tech just so they can say they do and chances are, that guy is the asst. manager or manager and is not in the store to diagnose/repair vehicles anyway. Find a service location in the link below or get some names out of the yellow-pages and do a drive-by. Garages that employ ASE Certified Technicians will be marked with the 'Blue-Seal' insignia. If unsure about whether a place employs Certified Techs, just ask to see their credentials. ALL ASE Certified Technicians will be PROUD to show and display their certificate(s).

Thanks for the question, I hope this information was helpful to you.
Fred
Knucklebusters Used Auto & Truck Parts, Inc.
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php