Auto Parts: trnsfer case, bronco 4x4, axle ratios

Question
QUESTION: i have a 88 ford bronco 4x4 302 4 speed automatic but the transfer case is not in it what kind or size goes in it

ANSWER: Hi Tim,

Electric or manual shift?

Thanks for the question, I hope this information was helpful to you.
Fred
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php

---------- FOLLOW-UP ----------

QUESTION: manual shift

Answer
Hi Tim,

The short answer is: A Warner 1356 transfer case is what you need.

This assembly can be taken from any of the vehicles listed in the interchange listed below. Your axle ratios should match one of the axle ratios listed below also. If not, then something was changed on your vehicle and the T-Case for this interchange may NOT be the same as you need. The ID's given in the interchangeable T-Case assemblies section below MUST be adhered to. Those are the ONLY assemblies that will adapt to your vehicle without modification.

-----------------------------------------------
Interchange
-----------------------------------------------
BRONCO 87-88 manual shift
BRONCO 89 manual shift, ID E8TA-BA
BRONCO 89 manual shift, ID E8TA-EA

-----------------------------------------------
Axle ratio accepted by this T-Case
-----------------------------------------------
FD 3.08 axle ratio, '88-89
FD 3.55 & 4.10 axle ratio, '88-89

-----------------------------------------------
Interchangable T-Case assemblies
-----------------------------------------------

Ident: E7TA7A195BA 3.08 & 3.55 axle ratio, '87
Ident: E7TA7A195EA 4.10 axle ratio, '87
Ident: E8TA7A195BA 3.08 axle ratio, '88-89
Ident: E8TA7A195EA 3.55 & 4.10 axle ratio, '88-89
Ident: E8TABA 3.08 axle ratio, '88-89
Ident: E8TAEA 3.55 & 4.10 axle ratio, '88-89

Thanks for the question, I hope this information was helpful to you.
Fred
www.knucklebusters.us
570-453-0910
"Re-use is the best form of recycling" Help us recycle by purchasing used parts from us!
Looking for an ASE Certified shop near you? ASE Certified Technicians are the BEST of the BEST!
Click here: http://www.ase.com/bluesealsearch/locator.php