QuestionI'm not too sure what model# is my python car alarm system but i do know it has a remote start and an LCD screen with an actual 'lock' displayed, my problem is false alarms here and there. Every single time i press to lock the car everything locks just fine, chirps and all to verify it's been armed, problem is that the remote then vibrates after 3seconds or so alerting me that the Trunk is opened AND the Door when it's not at all. There's time that even after tha warning the alarm doesn't go off but when it do it shows up as the trunk being opened leaving me to believe it's a problem with the sensors that i believe is suppose to let me know when it's really opened and not a false trigger.
Any solution(s) as i don't want this occuring for no reason then i won't ever know when to take my alarm serious, let alone the unwanted noise it's causing when i'm not around to disarm the alarm from going off.
Please and thank you.
AnswerFor questions about DEI equipment & support,
please go to my forum at www.INSTALLSUPPORT.com
and in the previous answers area,
type in the manufacturer of the alarm.
I believe you will find an older thread on
where to get more on this issue.
If that does not answer your inquiry,
Please ask this question there as well.
The site moderator will be happy to assist.
He's very good about getting back
to folks quickly.
INSTALLSUPPORT.COM
Good luck.
ALARMTEK
