Car Alarms: car wont start, valet mode, dash area

Question
I have a 2003 hyundia tribron I have not used the keyless remote for a while because the car has a after market security and I had problems before well my car had been setting for a few days went out door was locked unlocked with key alarm went off. Don't have remote and now I can not start my car because the alarm is going off do I need to get a remote to unlock the door? I want this off my car how do I found out what it is I know it is after market the dealership told me that help

Answer
Ok, an installer would place the velet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM