Car Alarms: Car wont start 1996 Impala SS, chevy impala ss, valet mode

Question
I have a 1996 Chevy Impala SS. My son ran it out of gas and after putting gas into it...it appears that the alarm is activated and will not allow the car to start.  How do I bypass it? The car is sitting in front of someone elses home.

Answer
Hmmm, might need to be evaluated by a tech to
trouble shoot the issue. Until then, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
( if this is a remote starter, the antenna on the
front window glass may also have the over ride
button inset into it.)

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

There is no PASSLOCK in this car, so we assume
it's aftermarket.

ALARMTEK
CARALARMMAN.COM