Car Alarms: 1997 chrysler sebring alarm instructions, chrysler sebring, car alarm

Question
I have a 1997 sebring not a converatble the Alarm keeps going off when I unlock the door with the key how can I disconnect the alarm by cutting the correct wires

Answer

CHRYSLER SINGLE WIRE D Can't be done that way. Would require a relay and a 480 resistor to be used
to ground out the factory system (see attached pic).

Not an easy car to get around the security on I'm afraid.
And if done wrong, can cause severe damage to the BCM system in this
car.

Best suggestion is to take it to a car alarm technician
to have it done safely.

Good luck

ALARMTEK