Car Alarms: Viper Alarm System, chevrolet trailblazer ss, 2008 chevrolet trailblazer

Question
Hello,
I own a 2008 Chevrolet Trailblazer SS. It came with a Viper system installed in it. Which is great news. But unfortunately it will not work now. It won't lock, unlock, or autostart, and the blue led light is constantly blinking even when I am driving. It drained my battery and I just replaced it. I'm not sure what system it has, it is either the 5101 or 5601. I was wondering if you could help me troubleshoot this issue. I am in Germany and there is only one Viper store which is far from me and I am in desperate need of alarming my car. Last time something similar happened I was back in the U.S. and took it to a retailer and they fixed it for me by doing something under the dash on the drivers side. I wish I knew what they did. Please if you have any knowledge on this matter please let me know what to do.

Answer
AllExperts
Auto Responder...

Ah, I see you've asked for an answer I have
submitted many, many, MANY times before.

Please go back to www.carprotector.com and
use the searh bar there to look up my answer
for this one. I have gone into depth serveral
times on this general question, and now direct
people to see the past posts for the solution.

It was simply exausting sending the same info/
answer over and over again.

Take a couple of moments and look back
to see what I offered as a solution.

Try the keywords: VIPER, VALET, OVERRIDE, STARTER KILL,
DISARM AFTER MARKET, RESET ALARM, VALET SWITCHES.

Thanks for visitng ALARMTEK @
allexperts.COM