QuestionI bought a 1997 mitsubishi pajero 1997 with a Sentinal car alarm. The alarm has a mind of it's own by going off when i drive and wont open or disarm when i want to leave.
Sentinal no longer exist in Australia and no one can help me.
The previous owners had put the alarm in and they can't help me either.
I just need to know how to disarm and disconnect it so it no longer is causing me problems?
Answer
valet
Ok, an installer would place the velet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.
The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you,
That should solve the troubles.
Let me know what you discover.
ALARMTEK
CARALARMMAN.COM
