Car Alarms: car alarm, jeep grand cherokee, changing tunes

Question
QUESTION: changed batteries in a 1998 jeep grand cherokee lerado everytime i open the door alarm sounds have to use key remote to turn it off how do i disarm the alarm  don't ever use it it never was on until i changed battery

ANSWER: Please be more descriptive if possible.

"GOING OFF?"

I need to determine whether it's a factory alarm
issue or, if it's an aftermarket system you are
dealing with.

Ok let's clear up the terminology glitch here.

1. FACTORY/OEM alarm = Part of the original schematics
and plans from the manufacturer.
(horn honk, head lights flash, Starter may crank and
die, no spark)

2. DEALER INSTALLED alarm = Just that. Once the vehicle
is brought to a dealer, the dealer sub contracts the after market
security out.
(horn might honk, siren and parking lights flash, starter kill relya,
no start, no crank, just dead.)

3. AFTER MARKET alarm: Same as #2 but Customer IS AWARE that
the system was put in at the dealership, but may not
be informed of the brand name, or even what it's
total capabilities are.
(siren & parking lights flash, starter kill)

Which one applies to yours?

RM/ALARMTEK
CARALARMMAN.COM

---------- FOLLOW-UP ----------

QUESTION: ok i don't have a schematics for the car but the horn don't go off the lights don't flash its just a loud siren that keeps changing tunes as it gos the key remote  but the starter does not work it won't crank at all while alarm is going off so it sounds like the aftermarket or the dealer installed one

Answer
After Market.

Hmmm, might need to be evaluated by a tech to
trouble shoot the issue. Until then, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
( if this is a remote starter, the antenna on the
front window glass may also have the over ride
button inset into it.)

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM