Car Alarms: auto alarm, dash area, little spring

Question
We are programming our new remote but don't know were or what is the valet switch. We have autopage xt60 remote. Our systen is a RS 650+ I think.

Answer
Ok, an installer would place it in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

ALARMTEK
CARALARMMAN.COM