QuestionHi, i got a Chevrolet Starcraft 89 with a piranha car alarm installed. By accident i left my car with the lights turned on when i went to work the other day and later when i tried to start i with cables the alarm sets of and it wont start.
I'v read about turning the ignition and press a button under the dash but here is where my problem starts. insdead of a button i seems to got a switch with a key needed to turn it. so now I'm wondering is there an easy way to get past this?
I bought the car 3 months ago and when i called the previous owner he said he didn't got any key.
Since it's probably a relay somwhere needed to be activated can i follow the cables from the Switch and activate it "manually"?
My english is not very good but hopefully you can understand anyway. //F
AnswerPlease go to my forum at
www.INSTALLSUPPORT.com
and in the search bar there,
type in the manufacturer of the alarm.
I believe you will find an older thread on
where to get more on this issue.
If no luck in the site search engine
you can also try asking Robert, the
forum moderator in my installers forum.
That's
INSTALLSUPPORT.COM
If anyone can guide you to the this info,
he's your man.
Good luck.
ALARMTEK
