QuestionMy 2007 Dodge Ram has two panic alarm key fobs. The truck alarm goes off when the motor starts and both key fobs can't turn it off.
Answer
FIX STARTER
Ok, seems there is an after market conflict issue here.
I suggest the following:
Ok, an installer would place the valet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.
The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.
Leave it in valet mode, and this will solve the issue
for now. But removal of the after market
system is also suggested as it
is not a complete fix.
That should solve the troubles.
Let me know what you discover.
ALARMTEK
CARALARMMAN.COM
