QuestionI am trying to install a remote start in my 1995 E38. The problem is that the remote start tries to turn on the car's ignition but it does not come on. I checked the flashes on the Viper module and it says manual mode not initialized but my car is has a automatic transmission.
I tried to change to the auto mode but I am still getting the no start. I left a probe on the wires coming from the Viper module and it sends no power to the ignition switch. I used 12volts wiring guide but my car has three constant +12 and three green wires which are all ignition.
The Viper has Ignition Input/Output...Input 1.....Input 2. How am I supposed to wire it up?
Here are the links....
http://www.directeddealers.com/manuals/OG/Viper/G4102V_2008_09_web.pdf
http://www.the12volt.com/installbay/alarmdetail/313.html
http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp
Bulldog says that ignition 2 is the purple wire but 12volt says it is the accessory, which one is it?
I know that they say my car needs the bypass since it has EWS but I took my key, gutted it out since the batteries were dead, and it still started, unlocked, locked and allowed me to drive and restart the car again, so I know that is not the problem. Thanks.
AnswerTHIS IS AN AUTORESPONDER TO A DEI
EQUIPMENT SUPPORT QUESTION...
I No longer am responding to these questions
as it is clearly posted at www.CARPROTECTOR.com
that we don't supply any support questions
on any DEI equipment here at all, period.
Not trying to be a d***, but I am obligated
to decline.
Please try a google search for your problem,
or, just read the big sign I placed on
the ALLEXPERTS site to direct ANY DEI support
Q&A that arises.
ALARMTEK
