Car Alarms: Alarm Programming Mode, replacement remotes, transmitter programming

Question
Hey...I recently bought an aftermarket remote (clone) for my 1994 Acura Integra...the problem I'm having is I can't see to get the car to go into programming mode. The instructions says to turn ingnition on, press and hold valet button under steering column..until light flashes...the light never flashes or enters programming mode..in order for me to program new remote to system.  Any ideas why it won't enter programming mode?  It appears to be factory installed ?  The original old remote worked up until the point that I lost it.  Please help...thanks!

Answer
ALLEXPERTS.COM AUTO RESPONDER
FOR ALARMTEK AUTO ALARM
@ WWW.CARPROTECTOR.COM...

YOUR QUESTION ABOUT PROGRAMMING REMOTES
HAS PROMPTED THIS REPLY.

SORRY, I GUESS YOU MISSED THE REALLY BIG LETTERED
NOTE AT WWW.CARPROTECTOR.COM

AS IT SAYS ON THE SITE,
PLEASE DO NOT ASK FOR TRANSMITTER PROGRAMMING
INFORMATION. THIS IS NOT PART OF THE
SERVICES I WILL PROVIDE HERE.

PLEASE TRY A SITE THAT DOES.
EITHER THE MANUFACTURER, OR A SITE THAT PROVIDES
REPLACEMENT REMOTES ARE GOOD STARTING POINTS.
Try www.GOOGLE.com & search it out.

GOOD LUCK WITH IT.

ALARMTEK @
ALLEXPERTS.COM/
CARPROTECTOR.COM