Car Alarms: kill switch, valet mode, alarmtek

Question
Hey I have a trw keyless entry car alarm on my 1998 mustang and I was just wondering does it have an ignition "kill switch" like most car alarms.....?

Answer
Yes it does, To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
( if this is a remote starter, the antenna on the
front window glass may also have the over ride
button inset into it.)

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

I hope this helped.

ALARMTEK
CARALARMMAN.COM