Car Alarms: honda crv alarm, honda crv, valet mode

Question
started the car with a keyless remote but it wont work  freezing this morning

I used the manual key and the alarm set of and wont stop and the car wont start honda crv 2003

Answer
System is likely not set up for TACH mode.
Have your technician change that for cold weather.
Tachless settings are for areas that stay warm.

To override the alarm,
an installer would place the velet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to repair it,
is ti contact a local technician to
affect neccesary service for you.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM