Car Alarms: sync, valet mode, hyundai coupe

Question
hi i have a factory fob for my hyundai coupe 2.0 16v 2002 model. it is out of sync with my car and i can not disable the alarm so i can get into my car. i need to know how to re-sync it or completely disable the alarm system so i can just use the key.

thank you

Answer
Likely to be after market.
To start, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. The next step is to
either remove the alarm or, try to identify,
and get new remotes for it. To get the notes
for removing it, go to www.wirewerx.com .

But once in Valet mode, it will allow the car
to start and operate like there was no alarm at all.

If it is actually the OEM Hyundai alarm,
it would arm and disarm with the
door locking and unlocking.
(turn key in drivers door to the left all the way,
then right to disarm and unlock).

This is standard for a Japanese door lock
mechanism.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM