Car Alarms: 1995 ford ranger security alarm, valet mode, alram

Question
how do you unhook the alarm system - we cannot overide to use the valet mode because the wire has been cut.  we just dont want to mess with the alram anymore - been a headache anyway.  thank you

Answer
It's an after market system
from your description.
(valet switches do not exsist in
factory alarms/keyless entry.

Ok then, get over to the local car alarm shop,
or Best Buys will have a valet switch that
will fit for your
alarm.

In the mean time, cut off the switch part,
leaving the 2 wires that were connected, free.

Then twist together, turn on the ignition,
hold both wires to ground until the siren chirps.

That should reset and place the alarm into
over ride for now. Nothing accept the keyless entry
if installed will operate until you repeat the
same steps.

Then get a new switch and you're all set.

Have a good day.
Let me know if you were
successful.

ALARMTEK
CARALARMZ.COM